Oral Health and Behavioral Management of Children with Autistic Spectrum Disorder: A 30-year Retrospective Study.

PURPOSE: This article aims to determine the oral health status, the dental treatment, the behavioral management techniques, and the follow-up of pediatric autistic spectrum disorder (ASD) patients treated at the Clinic for Pediatric Patients with Disabilities (CPPD) at a public university in Brazil. METHODS: The medical records of all the patients seen between 1990 and 2020 were evaluated. Data were collected on the autistic patients' medical and dental conditions, treatments, behavior during dental visits, behavioral management techniques used, and the entire follow-up period at the clinic. The Student's t-test and chi-square tests were used to perform the statistical analysis (α = 0.05%). RESULTS: Sixty-six records of ASD children were analyzed from a total of 656 dental records. The majority were male (80.3%). The mean age was 7.39 ± 2.75 years. All the children had a cognitive deficit, and 62.5% used medication. Most of the children arrived with caries lesions (56.1%), and the mean number of decayed, missed and filled teeth in both the deciduous (dmft-d) and permanent dentition (DMFT) was 2.45 ± 3.13 and 0.87 ± 1.51, respectively. The restorative technique was the most commonly used procedure (54.5%), and protective stabilization was the most frequently used behavioral management technique (18.2%). Of the children who sought treatment, 86.4% were discharged, and 15.2% abandoned the procedure. The majority (those discharged) continued to undergo regular follow-up at the clinic (86%), and the incidence of new caries lesions observed was 33.33% Conclusions: Although our ASD patients had a high frequency of caries and dental treatment needs, we observed good adherence to the treatment, with a low dropout rate, and high discharge rate.

Dentine biomodification by sulphonamides pre-treatment: bond strength, proteolytic inhibition, and antimicrobial activity.

We evaluated the effects of dentine biomodification after pre-treatment with two sulphonamide carbonic anhydrase inhibitors (CAIs) of the N-[4-sulphamoylphenethylcarbamoyl]benzenesulphonamide type, investigating matrix metalloproteases activity, resin-dentine micro tensile bond strength, dentine surface wettability, and antimicrobial activities. Ninety-five sound-extracted human molars were selected for the study. Inhibitory effects were evaluated by gelatinase and collagenase activity tests and collagen degradation FT-IR spectroscopic analysis. Pre-treatment with the two CAIs kept the micro tensile values after 12 months of storage (32.23 ± 5.95) and cariogenic challenge (34.13 ± 2.71) similar to the initial, pre-treatment values (33.56 ± 4.34). A decreased Streptococcus mutans biofilm formation on dentine surfaces and antibacterial activity against planktonic bacteria were observed after CAI treatment. Dentine pre-treatment with sulphonamide CAIs maintained adhesion strength stability, allowed better dentine wettability, maintained matrix collagen, and showed anti-S. mutans activity.

Anquiloglossia em bebês: da embriologia ao tratamento - uma revisão de literatura / Ankyloglossia in babies: from embryology to treatment - a literature review

Objetivo: o objetivo do presente estudo foi realizar uma revisão narrativa de literatura sobre a anquiloglossia em bebês, apresentando os critérios para diagnóstico, implicações na amamentação e formas de tratamentos. Fontes dos dados: foram realizadas, em abril de 2022, buscas nas bases de dados PubMed e Scielo, considerando artigos publicados entre os anos 1990 e 2022. Foram utilizadas como palavras-chave: frenectomy; babies; ankyloglossia; breastfeeding. A seleção dos trabalhos foi realizada através da leitura dos títulos e dos resumos. Após a aplicação dos critérios de inclusão e exclusão, 27 artigos foram selecionados, sendo eles pesquisas originais, relatos de caso e revisões de literatura. Livros textos nacionais também foram utilizados. Síntese dos dados: apesar de não existir um teste para diagnóstico considerado padrão-ouro, a triagem neonatal para investigação de anquiloglossia é uma obrigatoriedade nas maternidades de todo o país. Os testes para diagnóstico mais utilizados no Brasil são "Teste da Linguinha" e de Bristol. Não foram encontradas evidências científicas que relacionem a frenotomia e/ou frenectomia à melhora da amamentação. A abordagem multidisciplinar abrangendo dentistas, fonoaudiólogos, pediatras, consultores de amamentação, otorrinolaringologistas, cirurgiões e outros profissionais capacitados, deve ser considerada para delinear a melhor conduta clínica. Dentre as técnicas cirúrgicas, a frenotomia em bebês mostra-se como sendo a mais segura por apresentar menos riscos de complicações transoperatórios e pós-cirúrgica. Conclusão: faz-se necessário a realização de estudos controlados e com baixo viés metodológico sobre diagnóstico, tratamento e impactos da anquiloglossia na amamentação para padronizar e nortear a conduta clínica da equipe multidisciplinar responsável pelo binômio mãe-bebê no período puerperal.

Objective: the aim was to conduct a narrative literature review on ankyloglossia in infants, presenting the criteria for diagnosis, implications on breastfeeding, and treatment options. Sources of data: a search was conducted in PubMed and Scielo databases, considering articles published between 1990 and 2022 in April 2022. The key words used were: frenectomy; babies; ankyloglossia; breastfeeding. The selection of the papers was made through the title and by reading the abstracts. After applying the inclusion and exclusion criteria, 27 articles were selected, which were original research, case reports and literature reviews. National textbooks were also used. Synthesis of data: there is no test for diagnosis considered gold standard, neonatal screening for ankyloglossia investigation is a mandatory in maternity hospitals all over the country. The most used diagnostic tests in Brazil are the "Martinelli Test" and the "Bristol test". No scientific evidence was found relating frenotomy and/or frenectomy to improve breastfeeding. A multidisciplinary approach including dentists, speech therapists, pediatricians, breastfeeding consultants, otorhinolaryngologists, surgeons, and other trained professionals must be considered to outline the best clinical management. Among the surgical techniques, frenotomy in infants is the safest because it presents fewer risks of transoperative and post-surgical complications. Conclusion: it is necessary to carry out controlled studies with low methodological bias on diagnosis, treatment, and the impact of ankyloglossia on breastfeeding, to standardize and guide the clinical management of the multidisciplinary team responsible for the mother-baby binomial during the puerperal period.

Influence of oral biofilm index, caries experience, and laboratory markers of disease progression on the oral carriage of Candida in HIV-infected and non-infected children: a cross-sectional study.

The present study aimed to compare the oral Candida rate between infected and uninfected children with the human immunodeficiency virus (HIV), as well as analyze the association between Candida spp. and predisposing factors of colonization, like oral biofilm index, caries experience, and laboratory markers of AIDS progression. A cross-sectional study was employed. Candida species were identified and quantified from saliva samples of 50 HIV-infected and 50 uninfected children. Biofilm index and decayed, missing, and filled teeth (dmft/DMFT) indices were assessed by oral clinical examinations. Additionally, CD4+ T lymphocyte count and viral load were obtained from medical records of the HIV-infected children. Candida species were cultured from 74% of the HIV-infected children and 46% of uninfected ones (p = 0.0076). Candida albicans and Candida parapsilosis were the most frequently isolated species in both studied groups. The isolation of Candida species was significantly higher in HIV-infected children with CD4 ≤ 15% (p = 0.0146); it had influence of mature oral biofilm and the caries index (dmft + DMFT ≥ 8) (p < 0.05) and was associated with the plasma viral load. The present data show that the HIV infection, oral biofilm index, caries experience, and laboratory markers of AIDS progression exert an influence on the prevalence of oral Candida in children.

Is the Oral Cavity of Intensive Care Unit Pediatric Patients More Susceptible to Methicillin-Resistant Staphylococcus aureus Infection?

Objective: The aim of this study was to assess the prevalence of methicillin-resistant Staphylococcus aureus (MRSA) in the oral cavity of pediatric patients hospitalized at an intensive care unit (ICU). Methodology: Thirty ICU patients (group 1) and 30 healthy patients (group 2), between 1 and 12 years of age, matched by sex and age, were selected from a public hospital in Brazil. After oral examinations, biological specimens (nostril swab, oral mucosa, and supragingival biofilm) were collected from both groups to verify the presence of Staphylococcus aureus. Identification occurred after growth in Tryptic Soy Broth with 7.5% of NaCl for 48 hours, growth in Mannitol Salt Agar, gram staining, catalase, and coagulase tests. S. aureus isolates were submitted to antibiotic sensitivity test. Results: Only 36.7% of patients in the ICU perform oral hygiene during the hospitalization period and 41.7% presented high level of dental biofilm accumulation. The presence of S. aureus was similar in patients from group 1 (43.3%, 13) and group 2 (50.0%, 15) (p = 0.60). Both groups presented 18 samples each that tested positive for S. aureus. However, when considering patients infected by MRSA, the prevalence was higher in group 1 (eight; 26.7%) than in group 2 (five; 16.7%) but no statistical difference was observed (p = 0.53). In group 1, nine MRSA samples were resistant to erythromycin and seven to clindamycin. In group 2, two MRSA samples were resistant to erythromycin and two to clindamycin. Conclusions: Although ICU children did not show a significant higher carriage of MRSA when compared with the healthy group in the population studied, the number of highly resistant strains in the oral cavity isolated from ICU patients adds an important risk factor to be considered by the medical team as possible source of systemic infections, extended hospital stay, and poor outcomes.

Filling Materials Efficacy on Preventing Biofilm Formation Inside Screw Access Channels of Implant Abutments.

The choice of the material used to fill screw access channels in implant-supported prostheses depends, in most cases, on operator's preference, without considering the susceptibility of biofilm colonization. Therefore, the aim of this study was to determine and compare the total amount of biofilm formed on different materials used to fill screw access channels in implant abutments. For this propose, titanium implant analogs were attached on abutments and divided into 5 groups: positive control (no filling material); negative control (closed with resin); and filled with cotton, gutta-percha, or polytetrafluoroethylene (PTFE). The analogs with attached abutments were then immersed in a brain heart infusion medium containing Candida albicans (strain 10231 from American Type Culture Collection [ATCC]) and incubated aerobically at 37°C with gentle agitation. After 15 days, materials were removed, and total viable biofilm on each material was quantified by methyl tetrazolium reduction assay at 490 nm. All experiments were performed in triplicate. Data were processed by IBM SPSS Statistic software using 1-way analysis of variance and Bonferroni post hoc tests to analyze differences between groups, with an overall significance level of P < .001. A significant difference was observed between cotton and gutta-percha (P < .017) and between cotton and PTFE (P < .025). However, there was no statistical difference between gutta-percha and PTFE (P > .050). Thus, this in vitro experiment showed that gutta-percha and PTFE presented lower biofilm formation compared with cotton when used to fill screw access channels. These results can provide a basis for future clinical studies that can be a guide to decreasing the occurrence of gaps and bacterial growth inside the implant/abutment attachment site. In addition, controlled in vivo studies are necessary to confirm the clinical viability of findings of this study.

Characterization and Anti-Caries Effect of an Experimental Adhesive Containing Natural Antimicrobial Agents.

PURPOSE: To characterize experimental adhesives containing natural antimicrobial agents (proanthocyanidins, apigenin, tt-farnesol) in the primer and to evaluate their anti-caries effect. MATERIALS AND METHODS: Natural agents were incorporated in the primer of an experimental adhesive: 4.5% proanthocyanidins (PA), 1 mM apigenin (API), 1 mM apigenin + 5 mM tt-farnesol (API + FAR), and primer without antimicrobial agent (control). Microtensile bond strength (µTBS) to dentin and nanoleakage were measured immediately (n = 7) and after 1 year of storage (n = 7). Water sorption (WS), solubility (SO), and degree of conversion (DC%) of the adhesives were measured. The hardness loss of enamel (n = 6) and dentin (n = 6) at the restorative margin was evaluated after biofilm formation. RESULTS: DC%, nanoleakage, and immediate µTBS were similar for all groups. After 1 year, API + FAR showed higher nanoleakage and lower µTBS than the other groups, which were similar. WS and SO of API + FAR were lower than in the other groups. PA, API, and API + FAR presented less hardness loss than did the control group. At enamel, PA and API presented less hardness loss than the control and API + FAR groups at distances 50 µm and 100 µm; the hardness loss of enamel was similar for all groups 150 µm from the margin. CONCLUSION: The addition of proanthocyanidins and apigenin to the adhesives decreased the hardness loss of dentin and enamel submitted to biofilm formation, without jeopardizing the physical properties of the adhesives. The combination of apigenin + tt-farnesol decreased the hardness loss of dentin but not of enamel, and decreased the µTBS after 1 year of storage.

Fabrication and characterization of remineralizing dental composites containing calcium type pre-reacted glass-ionomer (PRG-Ca) fillers.

OBJECTIVE: To fabricate and characterize dental composites with calcium type pre-reacted glass-ionomer (PRG-Ca) fillers. METHODS: PRG-Ca fillers were prepared by the reaction of calcium fluoroaluminosilicate glass with polyacrylic acid. Seven dental composites were produced from the same organic matrix (70/30wt% Bis-GMA/TEGDMA), with partial replacement of barium borosilicate (BaBSi) fillers (60wt%) by PRG-Ca fillers (wt%): E0 (0) - control, E1 (10), E2 (20), E3 (30), E4 (40), E5 (50) and E6 (60). Enamel remineralization was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), roughness (Ra), Knoop hardness (KHN), flexural strength (FS), flexural modulus (FM), water sorption (Wsp), water solubility (Wsl), and translucency (TP). Data were analyzed to one-way ANOVA and Tukey's HSD test (α=0.05). RESULTS: All composites with PRG-Ca induced enamel remineralization. E0 and E1 presented similar and highest DC% than E2=E3=E4=E5=E6. Ra and KHN were not influenced by PRG-Ca fillers (p<0.05). The higher the content of PRG-Ca, the lower FS, FM and TP (p<0.05). Wsp increased linearly with the content of PRG-Ca fillers (p<0.05). E6 presented the highest Wsl (p<0.05), while the Wsl of the other composites were not different from each other (p>0.05). SIGNIFICANCE: Incorporation of 10-40wt.% of PRG-Ca fillers endowed remineralizing potential to dental composites without jeopardizing the overall behavior of their physicochemical properties. Dental composites with PRG-Ca fillers seems to be a good alternative for reinforcing the enamel against caries development.

Physicochemical properties and biological effects of quaternary ammonium methacrylates in an experimental adhesive resin for bonding orthodontic brackets.

METHODOLOGY: Fixed orthodontic appliances may lead to biofilm accumulation around them that may increase caries risk. This study aimed to evaluate the influence of quaternary ammonium methacrylates (QAMs) on the physicochemical properties, cytotoxicity, and antibacterial activity of adhesive resins for orthodontic purposes. A base resin was prepared with a comonomer blend and photoinitiator/co-initiator system. Two different QAMs were added to the base adhesive: dimethylaminododecyl methacrylate at 5 wt.% (DMADDM) or dimethylaminohexadecyl methacrylate (DMAHDM) at 10 wt.%. The base adhesive, without QAMs, (GC) and the commercial Transbond™ XT Primer 3M (GT) were used as control. The resins were tested immediately and after six months of aging in the water regarding the antibacterial activity and shear bond strength (SBS). The antibacterial activity was tested against Streptococcus mutans via metabolic activity assay (MTT test). The groups were also tested for the degree of conversion (DC) and cytotoxicity against keratinocytes. RESULTS: The resins containing QAM showed antibacterial activity compared to the commercial material by immediately reducing the metabolic activity by about 60%. However, the antibacterial activity decreased after aging (p<0.05). None of the groups presented any differences for SBS (p>0.05) and DC (p>0.05). The incorporation of DMADDM and DMAHDM significantly reduced the keratinocyte viability compared to the GT and GC groups (p<0.05). CONCLUSION: Both adhesives with QAMs showed a significant reduction in bacterial metabolic activity, but this effect decreased after water aging. Lower cell viability was observed for the group with the longer alkyl chain-QAM, without significant differences for the bonding ability and degree of conversion. The addition of QAMs in adhesives may affect the keratinocytes viability, and the aging effects maybe decrease the bacterial activity of QAM-doped materials.

Physicochemical properties and biological effects of quaternary ammonium methacrylates in an experimental adhesive resin for bonding orthodontic brackets

Abstract Fixed orthodontic appliances may lead to biofilm accumulation around them that may increase caries risk. This study aimed to evaluate the influence of quaternary ammonium methacrylates (QAMs) on the physicochemical properties, cytotoxicity, and antibacterial activity of adhesive resins for orthodontic purposes. Methodology: A base resin was prepared with a comonomer blend and photoinitiator/co-initiator system. Two different QAMs were added to the base adhesive: dimethylaminododecyl methacrylate at 5 wt.% (DMADDM) or dimethylaminohexadecyl methacrylate (DMAHDM) at 10 wt.%. The base adhesive, without QAMs, (GC) and the commercial Transbond™ XT Primer 3M (GT) were used as control. The resins were tested immediately and after six months of aging in the water regarding the antibacterial activity and shear bond strength (SBS). The antibacterial activity was tested against Streptococcus mutans via metabolic activity assay (MTT test). The groups were also tested for the degree of conversion (DC) and cytotoxicity against keratinocytes. Results: The resins containing QAM showed antibacterial activity compared to the commercial material by immediately reducing the metabolic activity by about 60%. However, the antibacterial activity decreased after aging (p<0.05). None of the groups presented any differences for SBS (p>0.05) and DC (p>0.05). The incorporation of DMADDM and DMAHDM significantly reduced the keratinocyte viability compared to the GT and GC groups (p<0.05). Conclusion: Both adhesives with QAMs showed a significant reduction in bacterial metabolic activity, but this effect decreased after water aging. Lower cell viability was observed for the group with the longer alkyl chain-QAM, without significant differences for the bonding ability and degree of conversion. The addition of QAMs in adhesives may affect the keratinocytes viability, and the aging effects maybe decrease the bacterial activity of QAM-doped materials.

Effect of silver and resin reinforced glass ionomers on the enamel microhardness after exposure to cariogenic biofilm

Objective: To assess the superficial microhardness of enamel-restorations margins of glass ionomer cement reinforced with silver (RS), modified with resin (RI) and composite resin (CO) after cariogenic biofilm. Materials and Methods: Thirty bovine enamel blocks with standard cavities were divided into three groups according to the materials used: RI (Riva Light Cure™, SDI), RS (Riva Silver™, SDI) and CO (Filtek™ Z350 XT, 3M). Half of each enamel block surface was covered by acid resistant varnish. After that, the blocks were exposed to Streptococcus mutans biofilm. The varnish was removed from the blocks and superficial microhardness (MDS) was measured (Knoop, 50 g, 15 s), with five indentations, 100 µm from each other in three different directions. The data were analyzed by the Shapiro Wilk, Kruskal Wallis and Mann Whitney tests (p<0.05). Results: MDS analysis indicated that in 50 µm distance from the restoration, RS group obtained hardness gain (6.31±0.01), unlike RI (-0.36±0.05) and CO (-11.43±0.02) groups that demonstrated significant loss (p<0.05). In other distances did not observe statistical difference between the groups. Regardless of the distance up to 450 µm, significant high total mineral gain was observed for RS group compared to the CO group; however, RS and RI presented similar enamel microhardness. Conclusion: All glass ionomers increased microhardness of enamel blocks even in contact with cariogenic biofilm. Although only the silver reinforced glass ionomer prevented demineralization at the margin restorations in 50 µm from the margin.

Objetivo: Comparar a desmineralização nas margens da interface dente/restauração utilizando cimento de ionômero de vidro modificado com resina (RI) e reforçado com prata (RS) e com resina composta (CO) após desafio cariogênico. Materiais e Métodos: 30 blocos de esmalte bovino com cavidades padronizadas foram divididos em 3 grupos de acordo com os materiais utilizados: RI (Riva Light CureTM, SDI), RS (Riva SilverTM, SDI) e CO (FiltekTM Z350 XT, 3M). Metade de cada superfície de esmalte restaurada foi protegida com verniz ácido-resistente. Os blocos foram expostos ao biofilme de Streptococcus mutans. O verniz foi removido dos espécimes com algodão e álcool para mensuração da microdureza superficial (MDS - Knoop, 50 g, 15 s), através de 3 linhas com 5 indentações em cada e 100 µm de distância entre elas. Os dados foram submetidos ao programa SPSS 20.0, teste de normalidade de Shapiro Wilk, Kruskal Wallis e Mann Whitney (p<0,05). Resultados: A análise da MDS demonstrou que na distância de 50 µm da restauração, o grupo RS apresentou ganho percentual de dureza (6,31 ± 0,01), diferentemente dos grupo RI (-0,036 ± 0,05) e CO (-11,43 ± 0,02) que apresentaram perda significativa (p<0,05). Nas demais distâncias, não foi observada diferença estatística entre os grupos. Conclusão: Todos os cimentos de ionômero de vidro aumentaram a microdureza superficial total dos blocos de esmalte mesmo após exposição ao biofilme cariogênico. No entanto, apenas o grupo RS impediu a desmineralização a 50 µm das margens de restaurações submetidas a biofilme cariogênico.

Effects of a biomimetic analog-based experimental bonding system on caries-affected and sound dentin.

This study compared the ultrastructure, chemical composition, and proteases activity (PA) of sound (SD) and caries-affected dentin (CAD) in the dentin hybrid layer after using an experimental bonding system containing pyromellitic dianhydride glycerol methacrylate and biomimetic analogs. The bonding system used a three step and a total-etch procedure. Polyacrylic acid (5%) and sodium trimetaphosphate (5%) were added to the primer and monocalcium phosphate monohydrate (9%), beta-tricalcium phosphate (10.5%), and calcium hydroxide (0.5%) were added to the adhesive. Transmission electron microscopy (TEM) was used to evaluate the resultant structure, particularly the adhesive-dentin and the demineralized-SD interfaces. The chemical composition was evaluated through energy-dispersive X-ray spectroscopy (EDS) and selected area electron diffraction (SAED). The PA was measured with the Coomassie Blue-G250 coloring test, and the PA data were analyzed by ANOVA. EDS identified the presence of isolated calcium phosphate nanoparticles in the demineralized region; however, the SAED analysis did not show any evidences of hydroxyapatite (HA) neoformation in SD and CAD. The biomimetic analog-based adhesive system inhibited the activities of dentin proteases immediately after treatment. Additionally, the proteolytic activity on the affected dentin resembled that of the SD. In conclusion, no HA formed in the demineralized SD and CAD although there were calcium and phosphate deposits. The experimental adhesive system inhibited dentin proteases. The present study uses a new approach to investigate the hybrid layer behavior in dentin. The experimental adhesive system was synthesized and used on sound and affected-caries dentin as the substrate to reproduce real clinical conditions.

Fabrication and characterization of remineralizing dental composites containing hydroxyapatite nanoparticles.

The aim of this study was to fabricate and characterize dental composites containing hydroxyapatite nanoparticles (HApNPs). Four dental composites were produced from the same organic matrix (70 wt% Bis-GMA and 30 wt% TEGDMA), with partial replacement of BaBSi particles (65 wt%) by HApNPs in the following concentrations (wt%): E0 (0) - control, E10 (10), E20 (20) and E30 (30). Ca2+ and PO43- release was evaluated in solutions with different pHs (4, 5.5, and 7) using atomic emission spectroscopy with microwave-induced nitrogen plasma while the enamel remineralization potential was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), microhardness (KHN), flexural strength (FS), elastic modulus (EM) and translucency (TP). The higher the HApNPs content, the higher the Ca2+ and PO43- release. The ions release was influenced by pH (4 > 5.5 > 7) (p < 0.05). All composites loaded with HApNPs were able to remineralize the enamel (E30 = E20 > E10) (p < 0.05). Contrarily, E0 was not able of recovering the enamel mineral loss. E0 and E10 presented highest DC%, while E20 and E30 showed similar and lowest DC%. KHN and FS were decreased with the addition of HApNPs, while EM was not influenced by the incorporation of HApNPs. E10 presented statistically similar TP to E0, while this property decreased for E20 and E30 (p < 0.05). Incorporation of HApNPs into dental composites promoted enamel remineralization, mainly at potentially cariogenic pH (= 4), while maintained their overall performance in terms of physicomechanical properties.

Mirror image: an unusual case of prolonged tooth retention in twins

Introduction: Studies of twins are important because environmental and genetic factors seem to be related to the phenotypic alterations. Objective: This paper presents a unique case of monozygotic twins with mirror image of a retained primary central incisor. Case report: Twin male brothers, 9-years-old, presented prolonged retention of the primary central upper incisor. The over-retained teeth in one twin were a mirror image of those in the other twin. The first twin presented a prolonged retention of the tooth 51 whereas the other twin presented a prolonged retention of tooth 61. After radiographic exams the over-retained teeth were extracted. Conclusion: Twins may show similarity in pattern of dental anomalies supporting the influence of genetic factors. In identical twins the location of diagnosed anomalies can be mirror imaged. This fact should lead the professional to examine the pair of twins in order to diagnose any dental anomaly that may be present.

Introdução: Estudos feitos em gêmeos são importantes porque fatores ambientais e genéticos parecem estar relacionados às alterações fenotípicas. Objetivo: Este artigo apresenta um caso raro de gêmeos monozigóticos apresentando imagem em espelho de retenção prolongada de incisivos centrais decíduos superiores homólogos. Relato do caso: Os irmãos gêmeos, com 9 anos de idade, não apresentavam história de trauma orofacial ou doença comum da infância. Após exames clínicos e radiográficos foram identificados a retenção do dente 51 no gêmeo 1 e do dente 61 no gêmeo 2. Em ambos os pacientes, os dentes 11 e o 21 estavam em erupção. O tratamento proposto foi a exodontia dos dentes decíduos com anestesia local e acompanhamento. Conclusão: Gêmeos podem apresentar semelhança no padrão de anomalias dentárias devido à influência de fatores genéticos. Adicionalmente, em gêmeos monozigóticos, a localização das anomalias diagnosticadas pode se apresentar invertidas ou imagem em espelho. Esse fato deve estimular o profissional a examinar o par de gêmeos para diagnosticar qualquer anomalia dentária que possa estar presente. O diagnóstico precoce e tratamento adequados devem ser realizados para evitar danos funcionais e estéticos em pacientes com retenções dentárias.

Characterization and Antibacterial Effect of an Experimental Adhesive Containing Different Concentrations of Proanthocyanidin.

PURPOSE: To evaluate the degree of conversion (DC%), water sorption (Sp), solubility (Sl), dentin bond strength (µTBS) (immediate and after 12 months of storage), and the antibacterial effect of an experimental adhesive containing different concentrations (%) of proanthocyanidin (PA): 0, 1%, 2%, 4.5%, and 6% (PA0, PA1%, PA2%, PA4.5% and PA6%, respectively). MATERIALS AND METHODS: DC% was measured by FT-IR and the Sp and Sl were determined based on the ISO 4049 specification. For µTBS, resin composite buildups were constructed incrementally and specimens (n = 8) were sectioned to obtain sticks (1 mm2). The µTBS was evaluated after 24 h and 12 months of water storage at 37°C. The failure mode was analyzed. The antibacterial effects were evaluated by analyzing the bacterial growth (S. mutans) (n = 5) and antibiofilm activity (n = 5) of the adhesives by spectrophotometry. RESULTS: The incorporation of PA did not affect the Sp, Sl, or DC%. Immediate µTBS was similar for all groups. After 12 months, PA4.5% presented significantly higher µTBS than PA0, while the other groups did not differ from PA0 and PA4.5%. Groups PA0 and PA1% underwent significant reduction in µTBS. In the experimental groups PA2%, PA4.5% and PA6%, µTBS was maintained after storage. All groups showed antibacterial activity. CONCLUSION: Incorporation of 2%, 4.5%, and 6% PA maintained the dentin µTBS after 12-month storage, without affecting the Sp, Sl, or DC% of experimental adhesives. PA4.5% presented higher µTBS values than PA0 after 12 months. The adhesive presented antibacterial effect irrespective of PA concentration.

Self-cured resin modified by quaternary ammonium methacrylates and chlorhexidine: Cytotoxicity, antimicrobial, physical, and mechanical properties.

OBJECTIVE: To evaluate the addition of dimethylaminohexadecyl methacrylate (DMAHDM) and chlorhexidine diacetate on cytotoxicity, antimicrobial activity, physical, and mechanical properties of a self-cured resin. METHODS: 132 disk-shaped and 48 rectangular specimens were divided into four experimental groups as described: Control Group (CG - no addition), dCHX (1%), DMAHDM (5%), and DMAHDM+dCHX (5%+1%). The biofilm viability, flexural strength (FS - ISO 20795-1:2013), surface roughness (SR), and color stability (ΔE) were analyzed after being stored for 4 weeks in distilled water and immersed for 72h in coffee. Cytotoxicity was measured after 24h, 3, and 7 days of elution using an MTT test on L929 cells (ISO 10993-5:2009). SR and ΔE were measured by a contact profilometer and a spectrophotometer using the CIELab parameter. Data were submitted to ANOVA and Bonferroni's/Tukey's tests (p≤0.05). RESULTS: Significant antimicrobial activity against Streptococcus mutans and Candida albicans was detected in all groups when compared to the CG (p<0.05). Only the dCHX group, in 24h of elution, demonstrated no cytotoxicity effects. There was a statistical difference for FS on the tested groups (p<0.05). No differences were detected in the initial roughness' measurements among the groups (p>0.05). However, after storage and immersion in coffee, the groups containing DMAHDM presented with rougher surfaces and significantly lower color stability compared to the control (p<0.05). SIGNIFICANCE: The addition of dCHX and DMAHDM in self-cured resin presented antimicrobial properties; however, cytotoxicity, physical, and mechanical properties were compromised.

Remineralizing potential of dental composites containing silanized silica-hydroxyapatite (Si-HAp) nanoporous particles charged with sodium fluoride (NaF).

OBJECTIVES: To synthesize and evaluate the enamel remineralizing potential of dental composites containing silanized silica-hydroxyapatite (Si-HAp) nanoporous particles charged with sodium fluoride (NaF). METHODS: Si-HAp particles were synthesized using a solid-state method. Dental composites were prepared by incorporating 70 wt.% of Si-HAp particles into a 70/30 wt.% Bis-GMA/TEGDMA organic matrix. Four dental composites were produced: SilF, Sil, F, and NT (nontreated). For SilF and F, Si-HAp particles were previously treated with 10% NaF (F). Afterwards, SilF and Sil composites had their particles silanized (Sil) with α-methacryloxypropyl-1-trimethoxysilane (α-MPS). The remineralizing potential was evaluated in caries-like enamel lesions induced byS. mutans biofilm for seven days and after pH-cycling for fifteen days using X-ray microtomography (micro-CT). Z350 was used as a commercial control for remineralizing potential evaluation Degree of conversion (DC%), flexural strength (FS), and Knoop hardness (KHN) were characterized. Data were analyzed using one-way ANOVA and Tukey's HSD post-hoc test (α = 0.05). RESULTS: F presented the highest enamel remineralizing potential, followed by SilF. Alternatively, Sil and NT were not capable of totally recovering the enamel mineral loss. NT showed the highest DC%, followed by Sil, F, and SilF. Sil and NT showed the highest FS when compared to SilF and F. No statistical significance in KHN was found among the composites. CONCLUSIONS: Dental composites with Si-HAp nanoporous particles charged with NaF presented a remineralizing potential for human enamel. However, this ability underwent a subtle reduction after particle silanization. CLINICAL SIGNIFICANCE: Si-HAp nanoporous particles charged with NaF may be an alternative for producing dental composites with an improved remineralizing potential for enamel affected by caries.

Experimental composites containing quaternary ammonium methacrylates reduce demineralization at enamel-restoration margins after cariogenic challenge.

OBJECTIVE: This study evaluated the influence of experimental composites containing quaternary ammonium monomers (QAM) at different concentrations and alkyl chains on demineralization at enamel-composite margins after cariogenic challenge. METHODS: Standardized 4×4mm cavities were cut into 35 bovine enamel blocks, which were randomly divided into seven groups (n=5) and restored with the following experimental composites and commercial materials: (G12.5) - 5% dimethylaminododecyl methacrylate (DMADDM) with a 12-carbon alkyl chain (G12.10) - 10% DMADDM, (G16.5) - 5% dimethylaminohexadecyl methacrylate (DMAHDM) with a 16-carbon alkyl chain (G16.10) - 10% DMAHDM, (CG) - control group (without QAM), (GZ250) - commercial composite (Filtek Z250®), and (GIC) - glass ionomer cement (Maxxion R®). After restorative procedures, initial microhardness was measured and experimental composites were subjected to Streptococcus mutans biofilm formation for 48h. After cariogenic challenge, the samples were washed and microhardness was reassessed. A 3D non-contact profilometer was used to determine surface roughness and enamel demineralization was assessed by micro-CT. Microhardness results were analyzed by the Kruskal-Wallis and Mann-Whitney tests and micro-CT results were analyzed by Tukey's HSD test (95% confidence interval). RESULTS: None of the materials could prevent mineral loss at the enamel-restoration margins. The addition of 10% DMAHDM yielded the lowest, albeit statistically significant, mineral loss (p<0.05). 3D non-contact profilometry showed enamel surface roughness modification after biofilm exposure. The CG had the highest roughness values. Micro-CT analysis revealed mineral loss, except for GIC. SIGNIFICANCE: The addition of 10% QAM with a 16-carbon chain in experimental composites reduced mineral loss at the enamel-restoration margins after cariogenic challenge.

Surface microhardness of different restorative materials exposed to candida albicans biofilm isolated from the oral cavity of HIV-infected children

Introduction: Candida albicans is one of the microrganisms that most often colonizes the oral cavity of HIV-infected children. This fungus secretes organic acids, which decrease the pH of the oral cavity; an environment that is already particularly acidic in HIV-Infected children because of their hypercaloric diets, use of sugary medicines, and poor oral hygiene. Considering the large number of dental restorations and the high prevalence of caries in this population, these conditions, including the metabolism of C. Albicans , can potentially cause problems in terms of the surface of restorative materials. Objective : Therefore, the aim of this study was to evaluate, in vitro , the potential of C. Albicans isolated from the dental biofilm of HIV-infected children to cause surface demineralization of the restorative materials used in pediatric dentistry. Material and method : Forty-four blocks of four different materials (2 resins, 1 compomer, and 1 glass ionomer cement) were made and separated into four groups (n = 11). All blocks were submitted to initial surface microhardness (ISM) analysis. Subsequently, each block was exposed to C. Albicans biofilm, formed from a 1 mL standard suspension containing 10 5 yeasts/mL, over seven days. The blocks were then cleaned and kept at 4 °C until being submitted for measurement of the final surface microhardness (FSM). The Mann-Whitney test was used for intragroup comparisons between ISM and FSM values. Results : The percentage of microhardness loss (% MHL) values between the four groups were compared using the Kruskall- Wallis test (95% CI). The ISM values ranged from 63.54 ± 11.41 to 77.92 ± 10.91, with no statistical differences being found (p = 0.76). After exposure to biofilm, no significant changes in surface microhardness were observed when comparing the values of ISM and FSM, except for group 3 (compomer Vitremer TM ), which had an FSM value of 40.45 ± 7.57 (p = 0.001). The % MHL of the compomer (group 3) was significantly higher (41.16%) than the other groups (5.35% group 1; 7.02% group 2; and 9.57% group 3) (p = 0.036). Conclusion : It can be concluded that, in vitro , C. albicans isolated from the dental biofilms of HIV-infected children can cause significant reduction in the surface microhardness of compomer compared with other materials.

Introdução: A Candida albicans é um dos microorganismos que mais frequentemente colonizam a cavidade bucal de crianças HIV+. Este fungo excreta ácidos, proporcionando uma diminuição do pH em um ambiente já altamente acidificado, como cavidade bucal dessas crianças devido sua dieta hipercalórica, uso de medicamentos açucarados e higiene oral deficiente. Considerando a elevada freqüência de restaurações dentárias em função da alta prevalência de cárie, todos esses fatores, incluindo o metabolismo da C. albicans, podem provocar alterações na superfície de materiais restauradores usados nesses pacientes. Objetivo : O objetivo do estudo foi avaliar, in vitro, a ação da C. albicans, isolada de uma criança HIV+, sobre a superfície de materiais restauradores utlizados na prática odontopediátrica. Material e método : Confeccionou-se 44 blocos de diferentes materiais (2 resinas, 1 compômero e 1 cimento ionomérico de Vidro) separados em 4 grupos (n=11) Todos os blocos foram submetidos a microdureza superfícial inicial (MDI). Posteriormente, foram expostos ao biofilme de C. Albicans formado a partir de 1mL de uma suspensão padronizada contendo 10 5 cels/mL, durante 07 dias. Após, os blocos foram limpos e mantidos sob refrigeração (4ºC) e submetidos à mensuração da microdureza final (MDF). Foram utilizados o Teste de Mann-Whitney para comparação intra grupo entre os valores de MDI e MDF; os valores de perda percentual de microdureza (%PMD) foram comparados com o Teste de Kruskall-Wallis (95% IC). Resultados : Os valores de MDI variaram de 63,54±11,41 a 77,92±10,91, sem diferença entre os grupos (p=0,076). Após exposição ao biofilme, não foram observadas variações significativas na microdureza (MDI X MDF) exceto para o grupo 3 (compômero Vitremer TM ), cujo valor de MDF foi 40,45±7,57 (p=0,001) . O %PMD do compômero (grupo 3) foi significativamente maior (41,16%) que o dos outros materiais (5,35% grupo 1; 7,02% grupo 2; e 9,57% grupo 3) (p=0,036. Conclusão: Conclui-se que a C. Albicans isolada do biofilme dental de criança HIV+ pode causar, in vitro, diminuição significante na microdureza superficial do compômero em comparação aos demais.

Candida spp. In Linear gingival erythema lesions in HIV-Infected children: report of six cases

Introduction: Linear gingival erythema (LGE), formally referred to as HIV-gingivitis, is the most common form of HIV-associated periodontal disease in HIV-infected individuals These lesions have been recently evaluated as a possible form of erythematous oral candidosis, mainly caused by Candida albicans. Other species such as C. tropicalis, C. stellatoidea, C. krusei, C. parapsilosis, C. glabrata and C. Dubliniensis, have also been identified in some HIV-infected subjects. Objective: This case report reveals the presence of typical LGE lesions in six HIV-infected children, and also investigates the etiologic agent through microbiological exams and correlates this oral manifestation with the patients' systemic conditions. Case report: Microbiological analyses showed growth for Candida spp in all patients; all of whom had severe immunosuppression. However, the regression of lesions was noted after antifungal medication. Conclusion: The presence of LGE in pediatric patients with AIDS may be a predictive marker in the progression of AIDS or it may be the first clinical manifestation of HIV infection in children. Hence it is important for dentists to be aware of such lesions.

Introdução: O eritema gengival linear (LGE), normalmente referido como gengivite do HIV, é a forma mais comum de doença periodontal presente em indivíduos infectados pelo HIV. Recentemente, estas lesões foram consideradas como uma possível forma de candidíase oral eritematosa causada por Candida. Albicans . Outras espécies, como C. tropicalis, C. stellatoidea,C. krusei, C. parapsilosis, C. glabrata e C. Dubliniensis também foram identificadas em indivíduos infectados pelo HIV associadas ao LGE. Objetivo: O presente artigo mostra a presença de lesões típicas de LGE em seis crianças infectadas pelo HIV e também investigou o agente etiológico das lesões orais através de exames microbiológicos, correlacionando o LGE com as condições sistêmicas dos pacientes. Case report: Análises microbiológicas mostraram crescimento positivo para Candida spp em todos os pacientes, os quais possuiam imunossupressão grave. Adicionalmente, a regressão total das lesões foi observada após medicação tópica antifúngica. Conclusão: A presença de LGE em pacientes pediátricos com AIDS pode ser um marcador preditivo da progressão.